How to Replace Sider Cover Slider Headband Parts on Beyerdynamic Headphones
Did the plastic slider pieces on your Beyerdynamic headphones crack and fall apart? Our upgraded slider parts fix it at home with the driver included in the kit.
Watch: Beyerdynamic slider part replacement
Ready to order? Grab the Beyerdynamic slider kit.
Usually ships within one business day from Fox Lake, IL. Small USA family business, established in 2014.
Shop Beyerdynamic Slider Parts: From $14.99What You’ll Need
- Slider cover parts for the side(s) you choose
- T10H Torx driver
You will reuse:
- The original screws from your headphones
Step-by-Step: How to Replace Beyerdynamic Slider Parts
Step 1: Remove the headband pad
Unsnap the headband pad and take it off.
Step 2: Remove the screws
Use the T10 hollow Torx driver to remove the screws holding the two slider pieces together.
Tip: Keep the screws in a safe spot. You need them to install the new parts.
Step 3: Start the screws in the new piece
Screw each screw into the new slider piece just far enough that about an eighth of an inch sticks out the other side.
Step 4: Attach the headband metal
Fit the two screw tips into the two small holes in the metal headband piece and hold it in place.
Step 5: Position the slider
While holding that, slide the slider piece all the way down toward the ear cup and set it between the headband metal pieces. It fits in perfectly when it’s right.
Step 6: Clamp and tighten
Put the other plastic piece on top, clamp it with your thumb and index finger, and screw the screws in the rest of the way.
Tip: They don’t need to be super tight. Just snug.
Step 7: Reinstall the headband pad
Wrap the headband pad around the headband with the wire inside, fold over the flap and snap it together. Make sure the wires have enough slack to adjust the ear cups.
Get your Beyerdynamics wearable again.
Usually ships within one business day from Fox Lake, IL. Small USA family business, established in 2014.
Get Beyerdynamic Slider PartsWhy Do Beyerdynamic Slider Parts Break?
The original slider covers are thin plastic. Every adjustment stresses them, and they eventually crack and fall apart so the headphones can’t be worn.
Our upgraded parts are redesigned and made in the USA from solid PA12 nylon using multi-jet fusion 3D printing. They’re a little bulkier than the originals, and the texture is mildly rough, but the headband still adjusts.
Replacement Parts for Beyerdynamic Headphones
More Beyerdynamic parts:
Frequently Asked Questions
Is the driver included?
Yes. Every kit includes the T10H Torx driver.
Which models does this fit?
DT 790, DT 797, DT 770, DT 770 PRO, DT 770 PRO HT, DT 880, DT 880 PRO, DT 880 PRO HT, DT 990, DT 990 PRO, HS 200 Dyn, HS 200 Rotor, HS 200 Trend and HS 400.
Can I buy just one side?
Yes. Choose both sides, left or right.
Will the headband still adjust?
Yes. It still adjusts, but it will have a different feel than the original.
DISCOVER · REPAIR · REVIVE
Your Beyerdynamics aren’t done yet.
Usually ships within one business day from Fox Lake, IL. Small USA family business, established in 2014. 20k+ positive reviews.
Shop Beyerdynamic Slider PartsBrowse All Beyerdynamic Parts
