🇺🇸 Ships Same Day from Fox Lake, IL · 20,000+ Five-Star Reviews · Repair Don't Replace

How to Replace Sony WH-XB910N Headband Pad Cushion | CentralSound

Your Sony WH-XB910N headband pad peeling, cracking, or falling apart? You don’t need a repair shop — and you definitely don’t need a new pair of headphones. This guide walks you through a complete headband pad replacement in about 10 minutes, screwdriver included in the kit.

Ready to order? Grab your XB910N replacement headband pad now.

Ships same day from Fox Lake, IL — USA small business

Shop XB910N Headband Pad — $17.99

What You’ll Need

Every CentralSound headband pad kit for the WH-XB910N comes with everything required for the swap — no extra tools to track down:

  • 1x Replacement headband pad cushion
  • 1x Screwdriver (for the bracket screws)

Step-by-Step: How to Replace the Headband Pad on Your Sony WH-XB910N

Step 1 — Remove the Bracket Screws

Using the included screwdriver, unscrew the screws holding the bracket in place on each side of the headband. There are four screws total — two on each side.

Tip: Once removed, set the screws aside somewhere safe. You’ll need these same screws to install the new pad.

Step 2 — Remove the Old Headband Pad

Using scissors or a sharp knife, carefully cut through the old headband pad material to remove it. Work slowly and be careful not to cut the wires running underneath the pad.

Step 3 — Prep the New Headband Pad

Take the new headband pad and separate the two pieces of material that are velcroed together, then unwrap it.

Step 4 — Position the New Pad

Start with the underside of the headband and wrap the pad around from there. The foam portion should end up on the bottom, facing your head.

Step 5 — Secure the Adhesive Tabs

The new pad has adhesive on both the top side and underside. Remove the backing from the top side first and tuck that tab underneath the plastic bracket. Then remove the backing on the underside and press that tab into place so it doesn’t shift around.

Tip: Press firmly along each tab for a few seconds after placing it — this helps the adhesive bond fully so it doesn’t lift later.

Step 6 — Reinstall the Bracket

Reattach the same bracket you removed in Step 1, using the same four screws to secure it on both sides. Once both brackets are screwed back in, you’re done — the new headband pad is installed.

Need the headband pad? We’ve got you covered.

Screwdriver included — nothing extra to buy

Shop XB910N Headband Pad — $17.99

Why Do Sony WH-XB910N Headband Pads Deteriorate?

Like most Sony headphones, the WH-XB910N headband pad uses a protein leather coating that mimics the feel of genuine leather. It’s comfortable at first — but it’s not built to last. Over time, heat, sweat, and skin oils break down the coating, causing it to peel, crack, and flake. This is completely normal and not a defect — it’s simply the nature of the material.

The good news: replacing the headband pad restores full comfort and makes your headphones look and feel brand new — all for a fraction of the cost of a Sony repair service or a full headset replacement.

All Replacement Parts for the Sony WH-XB910N

While you’re at it — here’s every part we carry for the WH-XB910N. Whether it’s the headband cracking, the ear pads peeling, or the side sliders snapping, we’ve got you covered.

Headband

CS Replacement Headband Pad Cushion

Velcro install, screwdriver included. $17.99

Shop Now

Ear Pads

Replacement Ear Pad Cushions

OEM style & size, Black or Blue. $19.99

Shop Now

Side Sliders

Replacement Side Cover Slider Parts Upgrade Kit

Fixes broken left & right sliders, tools included. $44.99

Shop Now

Frequently Asked Questions

Do I need any special tools to replace the headband pad?
No. Everything you need — including the screwdriver for the bracket screws — is included in the kit.

How long does the replacement take?
Most people complete the swap in about 10 minutes on their first attempt.

Is this an OEM Sony part?
No — this is a CentralSound compatible replacement part, engineered to fit the WH-XB910N. It is not made by or affiliated with Sony.

Will this fit my headphones?
This kit is compatible with the Sony WH-XB910N / WHXB910N YY2951 only. It does not fit the WH-XB900N. Please confirm your exact model before ordering.

DISCOVER · REPAIR · REVIVE

Your XB910Ns aren’t done yet.

Small family business · Fox Lake, IL · Ships within 1 business day

Shop XB910N Headband Pad Browse All Sony Parts
Go to full site