Replace Headband Part for Beats Studio 3 and 2 Headphones
Did the headband on your Beats Studio 3 or Studio 2 crack or snap near the end? Our Studio Pro headband kit also fits the Studio 3 and Studio 2, and this guide shows you how to swap it in at home.
Watch: Beats Studio 3 / Studio 2 headband replacement
Ready to order? Grab the headband kit.
Usually ships within one business day from Fox Lake, IL. Small USA family business, established in 2014.
Shop the Headband Kit: $29.99What You’ll Need
- Replacement headband arch in your choice of color
- Screws
- T5 Torx screwdriver
- Plastic pry tool
Step-by-Step: How to Replace the Beats Studio 3 / Studio 2 Headband
Step 1: Remove the hinge screws
Fold the hinge over to expose the screws at the end of the headband, then remove them with the T5 Torx driver. Do this on both sides and keep the screws somewhere safe.
Step 2: Separate the inner pad from the headband
Slide the pry tool between the rubber headband pad and the plastic headband, then pry gently to unclip them. Work along both sides until the old plastic headband comes off.
Tip: Take your time. Small clips hold the parts together, and the rubber pad can tear if you’re too rough.
Step 3: Fit the pad into the new headband
Line up the headband pad and its hinge ends with the new plastic headband, one end at a time. Make sure the wire is tucked in the middle.
Step 4: Snap the pieces together
Squeeze the pad and headband together and work along both edges. You should hear the clips click into place. If you don’t, realign and try again.
Step 5: Reinstall the screws
Fold each hinge over and reinstall the screws with the T5 driver. Check both hinges to make sure everything is tight.
Don’t replace your Beats. Fix them.
Usually ships within one business day from Fox Lake, IL. Small USA family business, established in 2014.
Get the Headband Kit: $29.99Why Do Beats Studio Headbands Break?
The headband flexes every time you put the headphones on or take them off, and most of that stress lands near the ends where the plastic meets the hinge. Over time the plastic cracks, usually right at the end.
A new headband arch gets you back to a solid fit without paying for a new pair. Our kit is made for the Studio Pro and also fits the Studio 3 and Studio 2. The colors are matched to the Studio Pro only.
Replacement Parts for the Beats Studio 3 and Studio 2
More parts for your Beats Studio:
Frequently Asked Questions
Will this fit my Studio 3 or Studio 2?
Yes. The headband is made for the Studio Pro and also fits the Studio 3 and Studio 2.
Will the color match my Studio 3?
The colors are matched to the Studio Pro only, so they may not exactly match your Studio 3 or Studio 2.
Are tools included?
Yes. The kit includes the headband, screws, a T5 Torx driver and a plastic pry tool.
Will it fit Beats Solo headphones?
No. This part does not fit any Beats Solo model.
I have a Studio Pro. Is there a guide for that?
Yes. See our Studio Pro headband guide.
DISCOVER · REPAIR · REVIVE
Your Studios aren’t done yet.
Usually ships within one business day from Fox Lake, IL. Small USA family business, established in 2014. 20k+ positive reviews.
Shop the Headband KitBrowse All Beats Parts
